3/8" GFO GRAPHITE/PTFE PACKING

This compression packing is supplied in G.F.O. Packing built to a 3/8 inch square cross section, catalogued under part number 11800375-05. It seals the shaft while allowing controlled leakage that lubricates and cools the packing set. Source specification: 5 LB. Box - Approx. 52 FT.

G.F.O. Packing is specified here for field-cuttable rings for fast, inexpensive repacking, controlled leakage that lubricates and cools the shaft. It resists process media, elevated temperature and pressure, and shaft wear. Rated for service to approximately 550°F. Exposure to over-tightening of the gland or running dry without flush will shorten service life.

You will find this material specified across mixers and rotary equipment, centrifugal and reciprocating pumps, and water and process plants.

11800375-05 ships individually. Unit weight is approximately 5 lb. Review your operating media and conditions against this specification before installation. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.