You have no items in your shopping cart.

432 PTFE SOLID BACKUP RING FDA

AS568-432 white PTFE (Teflon) 55 Shore D Back-Up Ring with an inside diameter of 5.35 in (135.89 mm), a cross section of 0.275 in (6.99 mm), and an outside diameter of 5.9 in (149.86 mm). This back-up ring extends o-ring service life by supporting the seal against extrusion under high pressure.

Available Stock
0
Status
Out of Stock
Material
PTFE (Polytetrafluoroethylene)
Dash
432
Durometer
55 Shore D
Cross_Section_Type
Round
Color
White
Minimum_Temp
-65°F (-53.9°C)
Maximum_Temp
500°F (260°C)
Nominal_CS
1/4 inch
Nominal_ID
5 3/8 inch
Nominal_OD
5 3/8 inch
u_m
EA
SKU:
TST432SO

Product Specification

-
TST432SO is an AS568-432 white PTFE (Teflon) 55 Shore D Back-Up Ring measuring an inside diameter of 5.35 in (135.89 mm), a cross section of 0.275 in (6.99 mm), and an outside diameter of 5.9 in (149.86 mm). In service, this back-up ring allows a standard o-ring to operate at higher pressures than it could unsupported.

The compound resists steam, oxidizing media, and solvents. PTFE (Teflon) is known for excellent dielectric properties and non-stick, non-contaminating surface characteristics. Published continuous service range is -65°F (-53.9°C) to 500°F (260°C).

It sees regular use in aggressive-media pipelines, laboratory equipment, and semiconductor fabrication.

Stocked as TST432SO and sold individually. Nominal inside diameter is listed as 5 3/8 inch. As always, verify media compatibility and operating conditions against the requirements of your specific application.
item
TST432SO
description
432 PTFE SOLID BACKUP RING FDA
uf_description2
0
Product_ID
TST432SO
Actual_CS
0.275 inch (6.99 mm)
Actual_ID
5.35 inch (135.89 mm)
Actual_OD
5.9 inch (149.86 mm)
FDA
No
Measure
Imperial
Metal_Detectable
No
NSF
No
ProductCode
6002
ProductCode Description
O-Rings - Backup Rings
UF_Backorderable
0