2.4MM CS X 19.3MM ID BLACK FKM 75D

This o-ring is supplied in black Viton® (FKM) 75 Shore A supplied with an inside diameter of 19.3 mm (0.76 in), a cross section of 2.4 mm (0.094 in), and an outside diameter of 24.1 mm (0.95 in), catalogued under part number V2.4X19.3. It creates a positive seal at flange, piston and rod interfaces without added hardware.

The compound resists aggressive chemicals, chlorinated solvents, and aromatic hydrocarbons. That behavior comes from the compound itself: Viton® (FKM) delivers outstanding high-temperature capability and very low compression set at elevated temperature. Continuous operating temperature is published at -15°F (-26.1°C) to 400°F (204.4°C). Verify compatibility before use with ketones and esters or amines.

You will find this material specified across oil and gas, chemical processing, and automotive fuel systems.

Stocked as V2.4X19.3 and sold individually. Unit weight is approximately 0.5715 g. Review your operating media and conditions against this specification before installation. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.