2MM CS X 24MM ID BROWN FKM 75D

Part number VB75M2X24 is a brown Viton® (FKM) 75 Shore A O-Ring supplied with an inside diameter of 24 mm (0.945 in), a cross section of 2 mm (0.079 in), and an outside diameter of 28 mm (1.1 in). An o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.

This material stands up to petroleum oils and fuels, engine and transmission fluids, and chlorinated solvents. Viton® (FKM) is widely chosen for the industry benchmark where nitrile reaches its thermal limit and outstanding high-temperature capability. Continuous operating temperature is published at -15°F (-26.1°C) to 400°F (204.4°C). It is not the right choice where amines or low-molecular-weight organic acids are present.

Typical settings include chemical processing, oil and gas, and aerospace.

VB75M2X24 ships individually. Unit weight is approximately 0.5275 g. Check the compound against your process media, pressure and temperature before committing to a design.