2.4MM CS X 49.6MM ID BLACK FKM 75D

Part number V2.4X49.6 is a black Viton® (FKM) 75 Shore A O-Ring supplied with an inside diameter of 49.6 mm (1.953 in), a cross section of 2.4 mm (0.094 in), and an outside diameter of 54.4 mm (2.14 in). An o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.

It resists aggressive chemicals, engine and transmission fluids, and chlorinated solvents. That behavior comes from the compound itself: Viton® (FKM) is valued for very low compression set at elevated temperature and outstanding high-temperature capability. Published continuous service range is -15°F (-26.1°C) to 400°F (204.4°C). Applications involving low-molecular-weight organic acids or hot water and steam call for a different compound.

You will find this material specified across semiconductor equipment, chemical processing, and high-temperature process equipment.

Order part number V2.4X49.6, sold individually. Unit weight is approximately 1.3499 g. Confirm chemical compatibility, pressure and temperature against your own application requirements before installing. APG can cross-reference from an existing part number, a drawing or a physical sample if this size is not an exact match.