2.5MM CS X 50MM ID BLACK FKM 75D

This o-ring is supplied in black Viton® (FKM) 75 Shore A supplied with an inside diameter of 50 mm (1.969 in), a cross section of 2.5 mm (0.098 in), and an outside diameter of 55 mm (2.17 in), catalogued under part number V2.5X50. It creates a positive seal at flange, piston and rod interfaces without added hardware.

This material stands up to aromatic hydrocarbons, chlorinated solvents, and petroleum oils and fuels. Viton® (FKM) is known for outstanding high-temperature capability and very low compression set at elevated temperature. Published continuous service range is -15°F (-26.1°C) to 400°F (204.4°C). Verify compatibility before use with ketones and esters or low-molecular-weight organic acids.

It sees regular use in chemical processing, semiconductor equipment, and high-temperature process equipment.

V2.5X50 ships individually. Unit weight is approximately 1.5 g. Check the compound against your process media, pressure and temperature before committing to a design. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.