2.5MM CS X 72MM ID BLACK FKM 75D

Part number V2.5X72 is a black Viton® (FKM) 75 Shore A O-Ring supplied with an inside diameter of 72 mm (2.835 in), a cross section of 2.5 mm (0.098 in), and an outside diameter of 77 mm (3.03 in). An o-ring creates a positive seal at flange, piston and rod interfaces without added hardware.

This material stands up to engine and transmission fluids, aromatic hydrocarbons, and chlorinated solvents. Viton® (FKM) is widely chosen for very low compression set at elevated temperature and outstanding high-temperature capability. Continuous operating temperature is published at -15°F (-26.1°C) to 400°F (204.4°C).

You will find this material specified across automotive fuel systems, oil and gas, and high-temperature process equipment.

V2.5X72 ships individually. Unit weight is approximately 2.145 g. Application requirements vary, so validate compatibility with your process conditions prior to installation. APG can cross-reference from an existing part number, a drawing or a physical sample if this size is not an exact match.