1.5MM CS X 7.5MM ID BROWN FKM 75D

This o-ring is supplied in brown Viton® (FKM) 75 Shore A with an inside diameter of 7.5 mm (0.295 in), a cross section of 1.5 mm (0.059 in), and an outside diameter of 10.5 mm (0.41 in), catalogued under part number VB75M1.5X7.5. It provides a reliable static or dynamic seal by deforming into its gland under assembly load. This item is further identified as Metric O-RING, JIS S8.

As a material, Viton® (FKM) is widely chosen for excellent resistance to compression set and permeation, very low compression set at elevated temperature. It resists chlorinated solvents, aromatic hydrocarbons, and many acids. Rated temperature range runs from -15°F (-26.1°C) to 400°F (204.4°C) in continuous service. Exposure to hot water and steam or low-molecular-weight organic acids will shorten service life.

You will find this material specified across chemical processing, automotive fuel systems, and aerospace.

Order part number VB75M1.5X7.5, sold individually. Unit weight is approximately 0.1025 g. Check the compound against your process media, pressure and temperature before committing to a design. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.