You have no items in your shopping cart.

568-215 FLUOROSILICONE 70 DURO ORINGS

AS568-215 blue Fluorosilicone (FVMQ) 70 Shore A O-Ring with an inside diameter of 1.046 in (26.57 mm), a cross section of 0.139 in (3.53 mm), and an outside diameter of 1.324 in (33.63 mm). Stands up to extreme cold and chlorinated solvents.

Available Stock
17
Status
Available
Material
Fluorosilicone
Dash
215
Durometer
70 Shore A
Cross_Section_Type
Round
Color
Blue
Minimum_Temp
-80°F (-62.2°C)
Maximum_Temp
350°F (177°C)
Nominal_CS
1/8 inch
Nominal_ID
1 1/16 inch
Nominal_OD
1 1/16 inch
u_m
EA
SKU:
FS70215
$1.1138
- +

Product Specification

-
APG stocks the FS70215, an AS568-215 blue Fluorosilicone (FVMQ) 70 Shore A O-Ring measuring an inside diameter of 1.046 in (26.57 mm), a cross section of 0.139 in (3.53 mm), and an outside diameter of 1.324 in (33.63 mm). An o-ring compresses into its gland to block fluid or gas migration across a joint.

This material stands up to ozone and weathering, aromatic fuels and jet fuel, and extreme cold. That behavior comes from the compound itself: Fluorosilicone (FVMQ) is widely chosen for good compression set resistance in static duty and the standard choice for static aerospace fuel system seals. Continuous operating temperature is published at -80°F (-62.2°C) to 350°F (176.7°C). It is not the right choice where hydrazine or brake fluids are present.

Typical settings include aerospace and defense, military ground vehicles, and aviation fuel systems.

Stocked as FS70215 and sold individually. Unit weight is approximately 1.4363 g. As always, verify media compatibility and operating conditions against the requirements of your specific application.
item
FS70215
description
568-215 FLUOROSILICONE 70 DURO ORINGS
uf_description2
BLUE
Product_ID
FS70215
Actual_CS
0.139 inch (3.53 mm)
Actual_ID
1.046 inch (26.57 mm)
Actual_OD
1.324 inch (33.63 mm)
FDA
No
Measure
Imperial
Metal_Detectable
No
NSF
No
ProductCode
6006
ProductCode Description
O-Rings - Bulk - Premium
UF_Backorderable
0