You have no items in your shopping cart.

568-224 FLUOROSILICONE 70 DURO ORINGS

AS568-224 blue Fluorosilicone (FVMQ) 70 Shore A O-Ring with an inside diameter of 1.734 in (44.04 mm), a cross section of 0.139 in (3.53 mm), and an outside diameter of 2.012 in (51.1 mm). This o-ring creates a positive seal at flange, piston and rod interfaces without added hardware.

Available Stock
661
Status
Available
Material
Fluorosilicone
Dash
224
Durometer
70 Shore A
Cross_Section_Type
Round
Color
Blue
Minimum_Temp
-80°F (-62.2°C)
Maximum_Temp
350°F (177°C)
Nominal_CS
1/8 inch
Nominal_ID
1 3/4 inch
Nominal_OD
1 3/4 inch
u_m
EA
SKU:
FS70224
$1.8245
- +

Product Specification

-
APG stocks the FS70224, an AS568-224 blue Fluorosilicone (FVMQ) 70 Shore A O-Ring built to an inside diameter of 1.734 in (44.04 mm), a cross section of 0.139 in (3.53 mm), and an outside diameter of 2.012 in (51.1 mm). An o-ring provides a reliable static or dynamic seal by deforming into its gland under assembly load.

The compound resists aromatic fuels and jet fuel, extreme cold, and chlorinated solvents. That behavior comes from the compound itself: Fluorosilicone (FVMQ) is known for good compression set resistance in static duty and silicone's low-temperature flexibility combined with fuel resistance. Published continuous service range is -80°F (-62.2°C) to 350°F (176.7°C).

It sees regular use in high-altitude equipment, aerospace and defense, and military ground vehicles.

This item is sold individually under part number FS70224. Unit weight is approximately 2.1282 g. As always, verify media compatibility and operating conditions against the requirements of your specific application.
item
FS70224
description
568-224 FLUOROSILICONE 70 DURO ORINGS
uf_description2
BLUE
Product_ID
FS70224
Actual_CS
0.139 inch (3.53 mm)
Actual_ID
1.734 inch (44.04 mm)
Actual_OD
2.012 inch (51.1 mm)
FDA
No
Measure
Imperial
Metal_Detectable
No
NSF
No
ProductCode
6006
ProductCode Description
O-Rings - Bulk - Premium
UF_Backorderable
1