You have no items in your shopping cart.

568-222 FLUOROSILICONE 70 DURO ORINGS

AS568-222 blue Fluorosilicone (FVMQ) 70 Shore A O-Ring with an inside diameter of 1.484 in (37.69 mm), a cross section of 0.139 in (3.53 mm), and an outside diameter of 1.762 in (44.75 mm). Good compression set resistance in static duty.

Available Stock
270
Status
Available
Material
Fluorosilicone
Dash
222
Durometer
70 Shore A
Cross_Section_Type
Round
Color
Blue
Minimum_Temp
-80°F (-62.2°C)
Maximum_Temp
350°F (177°C)
Nominal_CS
1/8 inch
Nominal_ID
1 1/2 inch
Nominal_OD
1 1/2 inch
u_m
EA
SKU:
FS70222
$1.5624
- +

Product Specification

-
FS70222 is an AS568-222 blue Fluorosilicone (FVMQ) 70 Shore A O-Ring measuring an inside diameter of 1.484 in (37.69 mm), a cross section of 0.139 in (3.53 mm), and an outside diameter of 1.762 in (44.75 mm). In service, this o-ring compresses into its gland to block fluid or gas migration across a joint.

As a material, Fluorosilicone (FVMQ) is specified for a very wide service temperature range and good compression set resistance in static duty. Expect good resistance to aromatic fuels and jet fuel, petroleum oils, and ozone and weathering. Published continuous service range is -80°F (-62.2°C) to 350°F (176.7°C). It should not be specified for service in high-temperature dynamic service or hydrazine.

Typical settings include military ground vehicles, high-altitude equipment, and aerospace and defense.

Order part number FS70222, sold individually. Unit weight is approximately 2.0083 g and nominal inside diameter is listed as 1 1/2 inch. Check the compound against your process media, pressure and temperature before committing to a design.
item
FS70222
description
568-222 FLUOROSILICONE 70 DURO ORINGS
uf_description2
BLUE
Product_ID
FS70222
Actual_CS
0.139 inch (3.53 mm)
Actual_ID
1.484 inch (37.69 mm)
Actual_OD
1.762 inch (44.75 mm)
FDA
No
Measure
Imperial
Metal_Detectable
No
NSF
No
ProductCode
6006
ProductCode Description
O-Rings - Bulk - Premium
UF_Backorderable
1