You have no items in your shopping cart.

*568-235 FLUOROSILICONE 70 DURO ORING

AS568-235 blue Fluorosilicone (FVMQ) 70 Shore A O-Ring with an inside diameter of 3.109 in (78.97 mm), a cross section of 0.139 in (3.53 mm), and an outside diameter of 3.387 in (86.03 mm). This o-ring remains the most cost-effective sealing element available for pressurized assemblies.

Available Stock
0
Status
Out of Stock
Material
Fluorosilicone
Dash
235
Durometer
70 Shore A
Cross_Section_Type
Round
Color
Blue
Minimum_Temp
-80°F (-62.2°C)
Maximum_Temp
350°F (177°C)
Nominal_CS
1/8 inch
Nominal_ID
3 1/8 inch
Nominal_OD
3 1/8 inch
u_m
EA
SKU:
FS70235

Product Specification

-
Part number FS70235 is an AS568-235 blue Fluorosilicone (FVMQ) 70 Shore A O-Ring built to an inside diameter of 3.109 in (78.97 mm), a cross section of 0.139 in (3.53 mm), and an outside diameter of 3.387 in (86.03 mm). An o-ring provides a reliable static or dynamic seal by deforming into its gland under assembly load.

As a material, Fluorosilicone (FVMQ) is specified for a very wide service temperature range and the standard choice for static aerospace fuel system seals. It resists ozone and weathering, chlorinated solvents, and extreme cold. Published continuous service range is -80°F (-62.2°C) to 350°F (176.7°C). It is not the right choice where brake fluids or ketones are present.

It sees regular use in aviation fuel systems, aerospace and defense, and military ground vehicles.

Order part number FS70235, sold individually. Nominal inside diameter is listed as 3 1/8 inch. As always, verify media compatibility and operating conditions against the requirements of your specific application.
item
FS70235
description
*568-235 FLUOROSILICONE 70 DURO ORING
uf_description2
BLUE
Product_ID
FS70235
Actual_CS
0.139 inch (3.53 mm)
Actual_ID
3.109 inch (78.97 mm)
Actual_OD
3.387 inch (86.03 mm)
FDA
No
Measure
Imperial
Metal_Detectable
No
NSF
No
ProductCode
6006
ProductCode Description
O-Rings - Bulk - Premium
UF_Backorderable
0