You have no items in your shopping cart.

*568-267 FLUOROSILICONE 70 DURO ORING

AS568-267 blue Fluorosilicone (FVMQ) 70 Shore A O-Ring with an inside diameter of 8.234 in (209.14 mm), a cross section of 0.139 in (3.53 mm), and an outside diameter of 8.512 in (216.2 mm). Resists extreme cold, ozone and weathering.

Available Stock
0
Status
Out of Stock
Material
Fluorosilicone
Dash
267
Durometer
70 Shore A
Cross_Section_Type
Round
Color
Blue
Minimum_Temp
-80°F (-62.2°C)
Maximum_Temp
350°F (177°C)
Nominal_CS
1/8 inch
Nominal_ID
8 1/4 inch
Nominal_OD
8 1/4 inch
u_m
EA
SKU:
FS70267
$8.7595
- +

Product Specification

-
The FS70267 is an AS568-267 blue Fluorosilicone (FVMQ) 70 Shore A O-Ring with an inside diameter of 8.234 in (209.14 mm), a cross section of 0.139 in (3.53 mm), and an outside diameter of 8.512 in (216.2 mm). This o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.

Fluorosilicone (FVMQ) is specified here for standard choice for static aerospace fuel system seals and very wide service temperature range. The material holds up against chlorinated solvents, extreme cold, and petroleum oils. Service temperature is rated from -80°F (-62.2°C) through 350°F (176.7°C). It is not the right choice where ketones or brake fluids are present.

Common environments for this compound include aerospace and defense, aviation fuel systems, and high-altitude equipment.

Stocked as FS70267 and sold individually. Application requirements vary, so validate compatibility with your process conditions prior to installation. APG supports cross-referencing from drawings, samples and competitor numbers when a listed size is not an exact fit.
item
FS70267
description
*568-267 FLUOROSILICONE 70 DURO ORING
uf_description2
BLUE
Product_ID
FS70267
Actual_CS
0.139 inch (3.53 mm)
Actual_ID
8.234 inch (209.14 mm)
Actual_OD
8.512 inch (216.2 mm)
FDA
No
Measure
Imperial
Metal_Detectable
No
NSF
No
ProductCode
6006
ProductCode Description
O-Rings - Bulk - Premium
UF_Backorderable
0