You have no items in your shopping cart.

HSN (HNBR) 80 568-353

AS568-353 green HNBR (Hydrogenated Nitrile) 80 Shore A O-Ring with an inside diameter of 4.975 in (126.37 mm), a cross section of 0.21 in (5.33 mm), and an outside diameter of 5.395 in (137.03 mm). Offers strong resistance to sour gas and amine inhibitors, ozone and weathering.

Available Stock
598
Status
Available
Material
HNBR
Dash
353
Durometer
80 Shore A
Cross_Section_Type
Round
Color
Green
Minimum_Temp
-40°F (-40°C)
Maximum_Temp
325°F (163°C)
Nominal_CS
3/16 inch
Nominal_ID
5 inch
Nominal_OD
5 inch
u_m
EA
SKU:
HSN80353
$3.7303
- +

Product Specification

-
Part number HSN80353 is an AS568-353 green HNBR (Hydrogenated Nitrile) 80 Shore A O-Ring supplied with an inside diameter of 4.975 in (126.37 mm), a cross section of 0.21 in (5.33 mm), and an outside diameter of 5.395 in (137.03 mm). An o-ring compresses into its gland to block fluid or gas migration across a joint.

HNBR (Hydrogenated Nitrile) is specified here for improved ozone and weathering resistance over standard nitrile, strong resistance to rapid gas decompression. It resists petroleum oils and fuels, sour gas and amine inhibitors, and heat and oxidation. Service temperature is rated from -40°F (-40°C) through 325°F (162.8°C). Exposure to chlorinated hydrocarbons or esters will shorten service life.

You will find this material specified across automotive air conditioning, commercial refrigeration, and engine timing systems.

This item is sold individually under part number HSN80353. Unit weight is approximately 11.8695 g. Review your operating media and conditions against this specification before installation.
item
HSN80353
description
HSN (HNBR) 80 568-353
Product_ID
HSN80353
Actual_CS
0.21 inch (5.33 mm)
Actual_ID
4.975 inch (126.37 mm)
Actual_OD
5.395 inch (137.03 mm)
FDA
No
Measure
Imperial
Metal_Detectable
No
NSF
No
ProductCode
6006
ProductCode Description
O-Rings - Bulk - Premium
UF_Backorderable
0