You have no items in your shopping cart.

HSN (HNBR) 80 568-178

AS568-178 green HNBR (Hydrogenated Nitrile) 80 Shore A O-Ring with an inside diameter of 9.737 in (247.32 mm), a cross section of 0.103 in (2.62 mm), and an outside diameter of 9.943 in (252.55 mm). This o-ring creates a positive seal at flange, piston and rod interfaces without added hardware.

Available Stock
0
Status
Out of Stock
Material
HNBR
Dash
178
Durometer
80 Shore A
Cross_Section_Type
Round
Color
Green
Minimum_Temp
-40°F (-40°C)
Maximum_Temp
325°F (163°C)
Nominal_CS
3/32 inch
Nominal_ID
9 3/4 inch
Nominal_OD
9 3/4 inch
u_m
EA
SKU:
HSN80178

Product Specification

-
The HSN80178 is an AS568-178 green HNBR (Hydrogenated Nitrile) 80 Shore A O-Ring supplied with an inside diameter of 9.737 in (247.32 mm), a cross section of 0.103 in (2.62 mm), and an outside diameter of 9.943 in (252.55 mm). This o-ring compresses into its gland to block fluid or gas migration across a joint.

HNBR (Hydrogenated Nitrile) is known for long service life in refrigerant and oilfield duty, the oil resistance of nitrile with substantially better heat capability. This material stands up to petroleum oils and fuels, modern refrigerants, and ozone and weathering. The material carries a published service range of -40°F (-40°C) to 325°F (162.8°C). Applications involving ketones or chlorinated hydrocarbons call for a different compound.

Common environments for this compound include engine timing systems, heavy-duty powertrain, and commercial refrigeration.

Stocked as HSN80178 and sold individually. Nominal inside diameter is listed as 9 3/4 inch. Application requirements vary, so validate compatibility with your process conditions prior to installation.
item
HSN80178
description
HSN (HNBR) 80 568-178
uf_description2
0
Product_ID
HSN80178
Actual_CS
0.103 inch (2.62 mm)
Actual_ID
9.737 inch (247.32 mm)
Actual_OD
9.943 inch (252.55 mm)
FDA
No
Measure
Imperial
Metal_Detectable
No
NSF
No
ProductCode
6006
ProductCode Description
O-Rings - Bulk - Premium
UF_Backorderable
0