You have no items in your shopping cart.

Q-147 FLUOROELASTOMER 75 Q RING

AS568-147 black Viton® (FKM) 75 Shore A Quad-Ring with an inside diameter of 2.675 in (67.95 mm), a cross section of 0.103 in (2.62 mm), and an outside diameter of 2.881 in (73.18 mm). This quad-ring seats in a standard o-ring gland while offering improved dynamic performance.

Available Stock
0
Status
Out of Stock
Material
Fluoroelastomer (FKM/Viton)
Dash
147
Durometer
75 Shore A
Cross_Section_Type
Quad
Color
Black
Minimum_Temp
-15°F (-26°C)
Maximum_Temp
400°F (204°C)
Nominal_CS
3/32 inch
Nominal_ID
2 11/16 inch
Nominal_OD
2 11/16 inch
u_m
EA
SKU:
QV70147

Product Specification

-
Part number QV70147 is an AS568-147 black Viton® (FKM) 75 Shore A quad profile Quad-Ring measuring an inside diameter of 2.675 in (67.95 mm), a cross section of 0.103 in (2.62 mm), and an outside diameter of 2.881 in (73.18 mm). A quad-ring provides a dual sealing band on each contact face for improved reliability.

Viton® (FKM) is specified here for industry benchmark where nitrile reaches its thermal limit and very low compression set at elevated temperature. This material stands up to aggressive chemicals, petroleum oils and fuels, and engine and transmission fluids. The material carries a published service range of -15°F (-26.1°C) to 400°F (204.4°C). It should not be specified for service in hot water and steam or ketones and esters.

It sees regular use in high-temperature process equipment, automotive fuel systems, and chemical processing.

Order part number QV70147, sold individually. Review your operating media and conditions against this specification before installation.
item
QV70147
description
Q-147 FLUOROELASTOMER 75 Q RING
uf_description2
0
Product_ID
QV70147
Actual_CS
0.103 inch (2.62 mm)
Actual_ID
2.675 inch (67.95 mm)
Actual_OD
2.881 inch (73.18 mm)
FDA
No
Measure
Imperial
Metal_Detectable
No
NSF
No
ProductCode
6017
ProductCode Description
O-Rings - Square/Quad - Commodity
UF_Backorderable
0