You have no items in your shopping cart.

Q-277 BUNA 70 Q RING

AS568-277 black Buna-N (Nitrile) 70 Shore A Quad-Ring with an inside diameter of 11.484 in (291.69 mm), a cross section of 0.139 in (3.53 mm), and an outside diameter of 11.762 in (298.75 mm). This quad-ring delivers lower friction and better sealing stability than a comparable round-section o-ring.

Available Stock
0
Status
Out of Stock
Material
Buna-N (Nitrile / NBR)
Dash
277
Durometer
70 Shore A
Cross_Section_Type
Quad
Color
Black
Minimum_Temp
-40°F (-40°C)
Maximum_Temp
250°F (121°C)
Nominal_CS
1/8 inch
Nominal_ID
11 1/2 inch
Nominal_OD
11 1/2 inch
u_m
EA
SKU:
QH70277

Product Specification

-
QH70277 is an AS568-277 black Buna-N (Nitrile) 70 Shore A quad profile Quad-Ring built to an inside diameter of 11.484 in (291.69 mm), a cross section of 0.139 in (3.53 mm), and an outside diameter of 11.762 in (298.75 mm). In service, this quad-ring delivers lower friction and better sealing stability than a comparable round-section o-ring.

This material stands up to many alcohols, propane and butane, and greases and lubricants. That behavior comes from the compound itself: Buna-N (Nitrile) is specified for reliable performance in both static and dynamic service, low compression set under sustained load. Rated temperature range runs from -40°F (-40°C) to 250°F (121.1°C) in continuous service.

It sees regular use in agricultural equipment, automotive, and construction equipment.

Order part number QH70277, sold individually. Confirm chemical compatibility, pressure and temperature against your own application requirements before installing. Not finding the exact configuration you need? APG cross-references from prints, samples and competitor part numbers.
item
QH70277
description
Q-277 BUNA 70 Q RING
uf_description2
0
Product_ID
QH70277
Actual_CS
0.139 inch (3.53 mm)
Actual_ID
11.484 inch (291.69 mm)
Actual_OD
11.762 inch (298.75 mm)
FDA
No
Measure
Imperial
Metal_Detectable
No
NSF
No
ProductCode
6017
ProductCode Description
O-Rings - Square/Quad - Commodity
UF_Backorderable
0