You have no items in your shopping cart.

Q-133 FLUOROELASTOMER 75 Q RING

AS568-133 black Viton® (FKM) 75 Shore A Quad-Ring with an inside diameter of 1.799 in (45.69 mm), a cross section of 0.103 in (2.62 mm), and an outside diameter of 2.005 in (50.93 mm). Very low compression set at elevated temperature.

Available Stock
1330
Status
Available
Material
Fluoroelastomer (FKM/Viton)
Dash
133
Durometer
75 Shore A
Cross_Section_Type
Quad
Color
Black
Minimum_Temp
-15°F (-26°C)
Maximum_Temp
400°F (204°C)
Nominal_CS
3/32 inch
Nominal_ID
1 13/16 inch
Nominal_OD
1 13/16 inch
u_m
EA
SKU:
QV70133
$0.8930
This product has a minimum quantity of 6
- +

Product Specification

-
The QV70133 is an AS568-133 black Viton® (FKM) 75 Shore A quad profile Quad-Ring with an inside diameter of 1.799 in (45.69 mm), a cross section of 0.103 in (2.62 mm), and an outside diameter of 2.005 in (50.93 mm). This quad-ring provides a dual sealing band on each contact face for improved reliability.

As a material, Viton® (FKM) delivers very low compression set at elevated temperature and long service life in hot, chemically aggressive environments. Expect good resistance to petroleum oils and fuels, aromatic hydrocarbons, and aggressive chemicals. Published continuous service range is -15°F (-26.1°C) to 400°F (204.4°C). It should not be specified for service in low-molecular-weight organic acids or ketones and esters.

Maintenance and OEM teams specify it across chemical processing, semiconductor equipment, and oil and gas.

QV70133 ships individually. Unit weight is approximately 1.5075 g and nominal inside diameter is listed as 1 13/16 inch. Review your operating media and conditions against this specification before installation.
item
QV70133
description
Q-133 FLUOROELASTOMER 75 Q RING
Product_ID
QV70133
Actual_CS
0.103 inch (2.62 mm)
Actual_ID
1.799 inch (45.69 mm)
Actual_OD
2.005 inch (50.93 mm)
FDA
No
Measure
Imperial
Metal_Detectable
No
NSF
No
ProductCode
6017
ProductCode Description
O-Rings - Square/Quad - Commodity
UF_Backorderable
1