-213 RED SILICONE 70D FDA O-RING

S70FDA213 is an AS568-213 red Silicone 70 Shore A O-Ring with an inside diameter of 0.921 in (23.39 mm), a cross section of 0.139 in (3.53 mm), and an outside diameter of 1.199 in (30.45 mm). In service, this o-ring provides a reliable static or dynamic seal by deforming into its gland under assembly load.

The material holds up against many oxidizing chemicals, ozone and UV exposure, and dry heat. Silicone is specified for an exceptionally wide service temperature range and flexibility that holds at very low temperatures. Continuous operating temperature is published at -80°F (-62.2°C) to 450°F (232.2°C). It is not the right choice where hydrocarbon fuels and oils or steam above its rated range are present.

This item meets FDA requirements for food contact, is metal detectable for HACCP and foreign-body control programs. You will find this material specified across food and beverage processing, sanitary process lines, and ovens and heated equipment.

S70FDA213 ships individually. Unit weight is approximately 1.141 g. Confirm chemical compatibility, pressure and temperature against your own application requirements before installing. APG can cross-reference from an existing part number, a drawing or a physical sample if this size is not an exact match.