You have no items in your shopping cart.

-423 RED SILICONE 70D O-RING

AS568-423 red Silicone 70 Shore A O-Ring with an inside diameter of 4.225 in (107.32 mm), a cross section of 0.275 in (6.99 mm), and an outside diameter of 4.775 in (121.29 mm). This o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.

Available Stock
360
Status
Available
Material
Silicone
Dash
423
Durometer
70 Shore A
Cross_Section_Type
Round
Color
Red
Minimum_Temp
-80°F (-62.2°C)
Maximum_Temp
450°F (232°C)
Nominal_CS
1/4 inch
Nominal_ID
4 1/4 inch
Nominal_OD
4 1/4 inch
u_m
EA
SKU:
S70423
$1.6380
- +

Product Specification

-
The S70423 is an AS568-423 red Silicone 70 Shore A O-Ring supplied with an inside diameter of 4.225 in (107.32 mm), a cross section of 0.275 in (6.99 mm), and an outside diameter of 4.775 in (121.29 mm). This o-ring compresses into its gland to block fluid or gas migration across a joint.

The material holds up against dry heat, extreme heat and cold, and many oxidizing chemicals. Silicone is widely chosen for an exceptionally wide service temperature range, physiological inertness and low toxicity. Continuous operating temperature is published at -80°F (-62.2°C) to 450°F (232.2°C). It is not the right choice where concentrated acids or hydrocarbon fuels and oils are present.

It sees regular use in sanitary process lines, medical devices, and pharmaceutical manufacturing.

S70423 ships individually. Unit weight is approximately 19.312 g. Confirm chemical compatibility, pressure and temperature against your own application requirements before installing.
item
S70423
description
-423 RED SILICONE 70D O-RING
uf_description2
0.275" (6.99MM) CS X 4.225" (107.31MM) ID
Product_ID
S70423
Actual_CS
0.275 inch (6.99 mm)
Actual_ID
4.225 inch (107.32 mm)
Actual_OD
4.775 inch (121.29 mm)
FDA
No
Measure
Imperial
Metal_Detectable
No
NSF
No
ProductCode
6005
ProductCode Description
O-Rings - Bulk - Commodity
UF_Backorderable
0