You have no items in your shopping cart.

*2107-021 PTFE SPIRAL B/U FDA

AS568-021 white PTFE (Teflon) 55 Shore D Back-Up Ring with an inside diameter of 0.926 in (23.52 mm), a cross section of 0.07 in (1.78 mm), and an outside diameter of 1.066 in (27.08 mm). This back-up ring allows a standard o-ring to operate at higher pressures than it could unsupported.

Available Stock
2258
Status
Available
Material
PTFE (Polytetrafluoroethylene)
Dash
021
Durometer
55 Shore D
Cross_Section_Type
Round
Color
White
Minimum_Temp
-65°F (-53.9°C)
Maximum_Temp
500°F (260°C)
Nominal_CS
1/16 inch
Nominal_ID
15/16 inch
Nominal_OD
15/16 inch
u_m
EA
SKU:
TSP021
$0.6467
- +

Product Specification

-
TSP021 is an AS568-021 white PTFE (Teflon) 55 Shore D Back-Up Ring measuring an inside diameter of 0.926 in (23.52 mm), a cross section of 0.07 in (1.78 mm), and an outside diameter of 1.066 in (27.08 mm). In service, this back-up ring extends o-ring service life by supporting the seal against extrusion under high pressure.

PTFE (Teflon) offers a very wide continuous service temperature range and near-universal chemical inertness. Expect good resistance to nearly all industrial chemicals, oxidizing media, and strong acids and bases. Service temperature is rated from -65°F (-53.9°C) through 500°F (260°C). It is not the right choice where service requiring elastic recovery or elemental fluorine at temperature are present.

Common environments for this compound include semiconductor fabrication, pharmaceutical and biotech, and food and beverage.

Stocked as TSP021 and sold individually. Review your operating media and conditions against this specification before installation.
item
TSP021
description
*2107-021 PTFE SPIRAL B/U FDA
Product_ID
TSP021
Actual_CS
0.07 inch (1.78 mm)
Actual_ID
0.926 inch (23.52 mm)
Actual_OD
1.066 inch (27.08 mm)
FDA
No
Measure
Imperial
Metal_Detectable
No
NSF
No
ProductCode
6002
ProductCode Description
O-Rings - Backup Rings
UF_Backorderable
0