Viton 70-325-Black-Pk10

This o-ring is supplied in AS568-325 black Viton® (FKM) 70 Shore A supplied with an inside diameter of 1.475 in (37.47 mm), a cross section of 0.21 in (5.33 mm), and an outside diameter of 1.895 in (48.13 mm), catalogued under part number SB-V70325-10. It seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces. Source specification: 1.875IDX1.5"ODX.1875"CS.

Viton® (FKM) is specified for long service life in hot, chemically aggressive environments and outstanding high-temperature capability. This material stands up to petroleum oils and fuels, aggressive chemicals, and chlorinated solvents. Continuous operating temperature is published at -15°F (-26.1°C) to 400°F (204.4°C). Applications involving amines or hot water and steam call for a different compound.

You will find this material specified across oil and gas, aerospace, and automotive fuel systems.

This item is sold by the bag under part number SB-V70325-10. Nominal inside diameter is listed as 1 1/2 inch. Application requirements vary, so validate compatibility with your process conditions prior to installation. Not finding the exact configuration you need? APG cross-references from prints, samples and competitor part numbers.