Viton 75-324-Black-Pk10

This o-ring is supplied in AS568-324 black Viton® (FKM) 70 Shore A with an inside diameter of 1.35 in (34.29 mm), a cross section of 0.21 in (5.33 mm), and an outside diameter of 1.77 in (44.96 mm), catalogued under part number SB-V70324-10. It provides a reliable static or dynamic seal by deforming into its gland under assembly load. Supplementary detail from the product record: 0.210CSX1.350"IDX1.770"OD.

As a material, Viton® (FKM) is valued for excellent resistance to compression set and permeation, very low compression set at elevated temperature. It resists petroleum oils and fuels, engine and transmission fluids, and chlorinated solvents. The material carries a published service range of -15°F (-26.1°C) to 400°F (204.4°C). It should not be specified for service in ketones and esters or amines.

You will find this material specified across high-temperature process equipment, automotive fuel systems, and aerospace.

SB-V70324-10 ships by the bag. Nominal inside diameter is listed as 1 3/8 inch. Application requirements vary, so validate compatibility with your process conditions prior to installation.